The kernel data inpage error is a Blue Screen of Death error code displayed by Windows (BSOD). When this error occurs, your computer will typically compile some diagnostic data before restarting.
If the issue persists, your computer will crash with the same kernel data inpage error message.
Kernel data inpage errors are frequently associated with memory module and hard drive hardware failures. In other cases, this error will appear as a result of a virus’s effects.
When this error occurs, your system usually compiles some diagnostic data and restarts. If this problem persists, your system will crash, and you will see the Kernel data inpage error message again.
Table of Contents
How the Kernel Data Inpage Error Appears
When this error occurs, you should see something like this:
Your PC ran into a problem and needs to restart. We’re just collecting some error info, and we’ll restart for you.
If you’d like to know more, you can search online later for this error: KERNEL_DATA_INPAGE_ERROR
KERNEL_DATA_INPAGE_ERROR
Causes of the Kernel Data Inpage Errors
The kernel data inpage error is a stop code that appears during blue screen crashes and is usually caused by a problem with the RAM or hard drive.
Here are some more error codes, as well as the specific problems they refer to:
0x0000007A: File access errors
0xC000009C: Bad hard drive sectors
0xC000009D: Loose cables or hard disk failure
0xC000016A: Bad hard drive sectors
0xC0000185: Unseated or damaged cables
How to Fix a Kernel Data Inpage Error
Because most kernel data inpage errors are caused by faulty memory modules or hard drives, the fix usually entails locating and replacing the faulty component.
In other cases, you’ll discover that a memory module or hard drive isn’t properly connected or that a virus is to blame. To resolve your kernel data inpage error, perform the following troubleshooting steps:
1. Examine and reinstall your memory modules.
In some cases, the issue may be caused by improperly seated memory modules. To rule this out and avoid any unnecessary expenses, open your computer and inspect your RAM.
If any modules aren’t properly installed or have come loose, reinstall them and see if the kernel data inpage error persists.
2. Examine and reinstall your hard drive cables.
This error typically indicates that the drive has physical flaws, such as bad sectors. In some cases, this issue may be caused by an improperly seated hard drive cable.
To rule out this possibility, open your computer, locate your hard drive, and reseat the connector cable. You should also check and reseat the cable that connects to your motherboard.
3. Test your memory.
Windows 10 includes a memory diagnostic tool. There are free options for Windows 7, Windows 8, and Windows 10.
If you have Windows 10, type “memory” into the taskbar search field, then choose Windows Memory Diagnostic > Restart now and check for errors.
MemTest 86 is the best free memory diagnostic tool, which you can download and use to test your RAM.
4. Use a program to test your hard drive.
You can use the built-in Windows error-checking tool or the checking command to check for hard drive problems.
Allow your preferred diagnostic tool to attempt a fix if it discovers any problems, such as bad sectors. If you are successful, you should be able to use your computer normally without experiencing any further kernel data inpage error crashes.
5. Disconnect all hardware peripherals.
This error can occur due to other peripherals, which is less likely. To rule out this possibility, turn off your computer, unplug all of your hardware peripherals, and restart it.
If your computer does not crash as a result of the kernel data inpage error, reconnect each device individually. When you locate the device that is causing the issue, you can either unplug it or replace it.
6. Perform a virus scan.
A virus can corrupt important files and cause a kernel data inpage error in some cases. It’s less likely than the other options, but it’s still worth checking.
If all else fails, try running a virus scan. Allow any of these programs to detect a virus, then check to see if you are still experiencing kernel data inpage errors.
7. Replace Damaged Hardware
The final option is to replace your hardware. If none of our solutions work, replace your hard drive and RAM modules. Use an old hard drive or borrow one from a friend.
Repeat the process with the RAM. Hardware issues are the most common cause of the kernel data inpage error BSOD.
FAQs
The kernel is a low-level program that interfaces all applications with the computer’s physical hardware. None of your applications would function without the kernel. A kernel is present in every operating system.
Remove any peripheral devices, disable Windows automatic restart, scan for corrupt files, and inspect the hard disk for errors to resolve a kernel security check failure error.
If the problem persists, try restoring the system to a previous working point, using the Startup Repair Tool, or restarting the computer.
Typically, the Linux kernel is found in the /boot directory. Enter ls /boot in the terminal window and look for a file called vmlinuz or vmlinux.
To see if the kernel security check failure is caused by a corrupted or damaged file system, open a command prompt and type “sfc/scannow” and press enter.
This tool will run, and if there are any issues, it will replace the corrupted files from the cache during the next reboot.
The dreaded BSoD is the last thing you want to see on your computer (blue screen of death). However, this is exactly how the kernel data inpage error will appear.
This is a serious code that you must not disregard. It’s a warning that something is wrong with your computer and that you should act quickly.
Bottom Line
That concludes our discussion of resolving the BSOD error code Kernel Data Inpage Error. If you see this error message on your system, you can try one or more of the fixes mentioned in this post. Once the error has been resolved, you can check the integrity of all your files and folders.
If you notice that some files are missing or that the drive is severely corrupted, you must immediately use a powerful data recovery tool, such as Stellar Data Recovery Professional for Windows, to recover the data.
Furthermore, to avoid future problems, try replacing the damaged drive with a new one.
I hope you find this article helpful
References
- lifewire.com– How to Fix a Kernel Data Inpage Error
COPYRIGHT WARNING! Contents on this website may not be republished, reproduced, or redistributed either in whole or in part without due permission or acknowledgement. All contents are protected by DMCA.
The content on this site is posted with good intentions. If you own this content & believe your copyright was violated or infringed, make sure you contact us at [techqlik1(@)gmail(dot)com] and actions will be taken immediately.