Why Are My Airpods So Quiet | Make Your AirPods Louder

If you have an Airpod and you have ever asked yourself this question,” why are my AirPods so quiet ?” then this article is for you. It can be frustrating knowing that your Airpods are not loud enough, especially when you are on an important call or want to relax with a movie or music.

The Apple AirPods range contains some excellent headphones; the AirPods Pro can even count itself among the best wireless earbuds you can buy. However, they all lack something commonplace on rival buds: the ability to adjust volume through their onboard controls.

Try out these wonderful hacks in the article below if you want to get the most out of your AirPods.

What Are Airpods?

According to Wikipedia, AirPods are wireless Bluetooth earbuds designed by Apple Inc. They were first announced on September 7, 2016, alongside the iPhone 7. Within two years, they became Apple’s most popular accessory. Apple’s entry-level wireless headphones are sold alongside the AirPods Pro and AirPods Max.

In addition to playing audio, the AirPods contain a microphone that filters out background noise as well as built-in accelerometers and optical sensors capable of detecting taps and pinches (e.g., double-tap or pinch to pause audio) and placement within the ear, which enables automatic pausing of audio when they are taken out.

How Do I Connect My Airpods?

Depending on your device, the pairing process for AirPods looks a little different. If you have an iPhone, follow these steps:

1. Unlock your iPhone (or iPad).
2. Open the AirPods case and leave the buds inside.
3. Wait for the pop-up window on your iPhone screen and tap “Connect.”
4. Your iPhone will then guide you through the Siri setup process.

If you have an Android phone, follow these Bluetooth pairing steps:

1. Enable Bluetooth on your Android device via Settings > Connections > Bluetooth.
2. Open the lid of your AirPods case and leave the buds inside.
3. Press and hold the button on the back of the case until the LED flashes white.
4. The AirPods should appear on the list of available devices. Select it.

How Do I Increase The Volume Of My Airpods?

Unlike your typical wired headphones, the AirPods do not have any inline controls, much like most wireless headphones. Unfortunately, all AirPods variants are limited to touch controls only. Touch controls are limited to clicks, double-taps, and long presses.

With this, adjusting the volume from the AirPods depends on the audio source. You can use any of the options below to increase the volume of your Airpods:

1. Using The Volume Slider

This one is as simple as it gets. To turn up the volume, you can reach out for your phone, turn the upper button of your volume rocker, and you’re good to go. You can also pull down the control center and adjust your phone’s volume there.

2. Using Siri

“Hey Siri, turn the volume up.”

Saying this phrase out loud is one of the easiest ways to increase or decrease your volume. Siri is one of the wisest and most popular virtual assistants out there, and simple tasks such as raising volume shouldn’t be a problem.

You can even ask Siri to execute more complex commands, such as to decrease your volume to a certain percentage. Another useful trick with Siri is to combine the play and volume commands in one sentence, like, “Hey Siri, play Alive by Celine Dion on Spotify in maximum volume.”

Also, you can ask Siri “Why are my Airpods so quiet”? It might help you with some answers.

3. Using The App Sound Settings

Some mobile apps also have volume settings where you can make the sound you’re listening to louder. With the Apple Music app, you’ll see a volume slider at the lower part of the screen when you play a song.

Using the app settings to adjust the volume for other applications, such as mobile games, is also quite useful. For example, if you’re playing a game on your phone while listening to music simultaneously, you can lower the game’s volume through the in-game settings to hear the music you’re playing better.

How Do I Increase The Volume Of My AirPods Max If Quiet?

Unlike their predecessors, the AirPods Max can adjust volume without using any of the methods mentioned above. The AirPod Max uses the Digital Crown.

This little button is a refuge of AirPods Max functions. To raise volume using it, all you need to do is rotate it clockwise. Consequently, rotating it counterclockwise will decrease the volume.

If you’re more comfortable the other way around, Apple allows users to change the direction of rotation to adjust the volume. Head on to Settings > Bluetooth, tap the “i” button next to your AirPods Max on the screen. Tap Digital Crown and, under “Increase Volume By Rotating,” choose either one of the options.

What To Do If Your Airpods Are So Quiet Or Not Loud Enough

If adjusting the AirPods’ volume doesn’t fix the issue, or if the AirPods still isn’t loud enough even at maximum volume settings, it could be because of other underlying hardware or software issues.

To fix this, we’ve compiled a list of the top-tested solutions you can try:

• Clean your AirPods
• Turn off low-power mode
• Check the sound balance
• Make sure the Airpods are charged
• Disable volume limits
• Turn off any equalizer (EQ) settings
• Reset Bluetooth Connection
• Restart your Phone
• Reset the Airpods
• Try Apple’s online support

1. Clean Your Airpods

If your AirPods are so quiet, dirt can be a major reason. Dirty AirPods can lead to all sorts of problems, including muffled sounds from the speakers with dirt, slime, and other debris filling up the ridges of the AirPods over time. One of the reasons your AirPods aren’t as loud enough is that they aren’t clean enough.

Luckily, the solution for dirty AirPods is simple — clean then. The proper way to clean your AirPods is to use 70% isopropyl alcohol, some cotton swabs, and a toothpick. Do these steps every 72 hours to have clean AirPods that will perform up to standards.

Dip the swabs into the alcohol solution to clean and disinfect the AirPods while being careful in cleaning the ports to avoid electrical damage. On the other hand, the toothpick can help you pick out residue from the ridges.

2. Turn Off Low Power Mode

If the Phone is in Low Power mode, it can affect some non-critical systems, which can cause audio to play at a lower volume than usual. Turn it off and use your AirPods with your Phone in standard power mode.

3. Check Sound Balance

The sound balance can also be an issue if your AirPods are so quiet. The sound balance is responsible for the individual volumes of each AirPod. At times, this accessibility setting can be misconfigured, resulting in an unbalanced sound where one AirPod is louder than the other.

Usually, people would adjust the sound balance when using only one AirPod to get more volume out of it. We could forget to adjust this back, leaving us with one AirPod too low.

Go to the iPhone Settings > Accessibility > Audio/Visual. Make sure the slider is balanced, with the button in the middle between the L and the R.

4. Make Sure The Airpods Are Charged

 If the AirPods have a very low battery, they can misbehave. Charge the batteries for one or two hours, then test the audio again.

5. Disable Volume Limits

Listening or watching at high volumes through your AirPods can be captivating, but we all know it can be harmful. Apple has placed volume limits to cap the maximum volume and prevent potential hearing damage.

In some cases, volume limits can be the reason behind low AirPods. If you want to make your AirPods louder, removing these sound limits is one way.

You can disable this feature with a tap or two by following these steps in the Settings app: Sounds & Haptics > Headphone Safety > Reduce Loud Sounds. Now, if Reduce Loud Sounds are already off (the slider is not green). Then turning on Reduce Loud Sounds will make the headphones quieter. If you are missing calls and alerts because the sound for those features is too low, then in the Sounds & Haptics section, you’ll see a slider to make those alerts louder. That section is called Ringer and Alerts.

6. Turn Off Any Equalizer (EQ) Settings

Most of the EQ settings tend to make audio played through the AirPods sound quieter, even the ones with Booster in the name. It’s best to turn the EQ off.

7. Reset Bluetooth Connection

It is no secret that the AirPods rely on Bluetooth to pair up with devices. This feature allows the AirPods to pair up with most Bluetooth-ready devices such as Android smartphones and iPhones.

However, in some cases, the Bluetooth connection between your AirPods and your device can have problems beyond our understanding. At times, the communication between the two devices can have issues resulting in volume problems. In these cases, even if your iPhone’s volume is maxed out, the AirPods can be playing it at 80% only.

So, if you suspect this to be the case, here’s a nifty way you can reset the volume connection by disconnecting and reconnecting the AirPods:

1. With your AirPods connected, play some music and turn the volume to zero.
2. Go to Settings > Bluetooth, and disconnect your AirPods by pressing the “i” button.
3. The music will automatically be paused to play it again and turn the volume back down to zero one more time.
4. Reconnect your AirPods and turn the volume up.

8. Reset Your Airpods

When all else fails, reset. Resetting is one of the proven laws in troubleshooting any gadget or device today, including your AirPods. It allows the AirPods and your iPhone to restart their connection and get off on the right foot.

Resetting your AirPods and AirPods Pro is pretty easy. All you need to do is head on to Settings > Bluetooth, tap the “i” button, and then tap Forget this Device. After that, you can reconnect your AirPods like it’s fresh out of the box.

Also, resetting the AirPods Max is a little different. You have to hold the noise control button and the Digital Crown for 15 seconds to do this. After this, you can connect them the same way you connected them when they were first out of their box.

9. Restart Your Phone

Following the principle behind resetting your AirPods, restarting your phone could eliminate any underlying software issues that may be causing the low volume.

10. Try Apple’s Online Support

If everything fails, you can try out Apple’s online support. Head to the website, choose AirPods from the grid menu, and choose Audio & Sound.

Low AirPods aren’t listed on the choices of problems you can choose from, so you could go ahead and click “The topic is not listed” and type your inquiry.

Apple may take some time to answer your query, and there is also a chance that they’ll provide you with the solutions we have discussed above. However, it is still worth a shot if you’re really out of options. You can make this your backup plan to submit your inquiry and explore the solutions above while waiting for a response from Apple.

Bottomline

This article has successfully answered the question ”why are my Airpods so quiet”?

AirPods volume issues can be annoying but only for those who may not be familiar with the solutions yet, so be sure to help yourself with the tips we mentioned above.

The next time your AirPods pull the same situation, you’ll know what to do, and you won’t have to worry much anymore.

Why Are My Airpods So Quiet FAQs

Does this article meet your immediate needs? If yes, please kindly share it with your friends. Also, do well to share your opinion in the comment section below.

COPYRIGHT WARNING! Contents on this website may not be republished, reproduced, or redistributed either in whole or in part without due permission or acknowledgment. All contents are protected by DMCA.

The content on this site is posted with good intentions. If you own this content & believe your copyright was violated or infringed, make sure you contact us at [techqlik1(@)gmail(dot)com] and actions will be taken immediately.