The Oculus Quest/Quest 2 headset has long been a reliable VR headset. But this piece is not for you if you have just finished assembling your Quest/Quest 2. However, if you have been using the Quest/Quest 2 for a period, you might want to learn how to charge your Oculus controllers because they should be running low.
Your Oculus controllers will run low on battery if you have been using it for a while. It can die suddenly and that can be frustrating. Since the Quest/Quest 2’s outstanding feature (hand tracking) is unavailable on many titles, this makes the controllers very essential.
Therefore, you must always charge your Oculus Quest/Quest 2 controllers to keep using it. And this guide will show you how!
Table of Contents
Can You Charge Oculus Quest/Quest 2 Controllers?
You can’t charge the meta (Oculus) Quest/Quest 2 controllers. This is because the controllers don’t come with a built-in battery. However, every controller has a battery compartment that contains a single AA battery for power.
Although the Quest/Quest 2 controllers may not appear like they have an opening, they have a slot that’s hidden by a battery slider. Maybe you’ve seen a small eject symbol on your controllers’ grip.
But that AA battery incorporated inside is alkaline. So, do not attempt to recharge it. However, you can swap the dead battery with rechargeable or disposable AA batteries. You can proceed to get a replacement but continue reading to understand how to charge your Oculus Quest/Quest 2 controllers’ batteries.
See Also: The 4 Best Charging Stations of 2024
How To Check Your Oculus Oculus Quest Controller Battery Level
Although the Oculus Quest/Quest 2 controller batteries have a bit of stable battery life, you still need to monitor the battery level. Doing this will help you ensure your battery doesn’t run down during an intensive gaming session.
The following are various ways to check the battery level of your Quest/Quest 2 controllers:
- Go to your Quest/Quest 2’s home screen. Then, look down towards the menu. If you don’t see the menu, press the Oculus button to display it.
- In the menu, you will see the battery level of your Oculus Quest/Quest 2 headset alongside that of the controllers. What’s more interesting is, the menu bar displays the battery levels for the left and right controllers separately. This helps you understand how much battery is left and how much is being drained.
How To Charge Your Meta (Oculus) Quest/Quest 2 Controllers
The controllers that come with the Quest/Quest 2 have a little eject icon shown on each grip, opposite the trigger button. That is the battery compartment lid and it has a single AA battery hidden within.
These batteries incorporated within the controllers are alkaline and you cannot recharge them. If you want to charge your Oculus Quest/Quest 2 controllers, you must replace the batteries with rechargeable ones.
Again, if you want enough convenience, you can get four batteries instead of two and keep two on the charger. This way, you’ll have enough batteries ready for use anytime.
Check out how to charge your Quest controllers below:
- Get your Oculus controller and hold it using one or both hands. While holding it, ensure the small eject icon is facing upward and away from you.
- Gradually slide it away from yourself with your thumb(s) to open the battery compartment cover.
- Take out the battery cover.
- Remove the AA battery.
- Replace the dead battery with a rechargeable AA battery.
- Put back the battery cover and repeat steps 1-5 above with the second controller.
Read this article: The Top Programmable Logic Controller Brands To Know About
How To Charge Meta Quest/Quest 2 Controllers Using The Charging Dock
Quest/Quest 2 controllers are not rechargeable from the factory. However, you can use the officially licensed Anker Charging Dock to charge your controllers and headset more effortlessly.
Below are steps to charge your Oculus Quest/Quest 2 controllers:
- Take out the battery covers from your controllers.
- Remove the batteries from both controllers.
- Replace it with the rechargeable batteries that accompanied the dock.
Note: The dock includes special rechargeable batteries with charge contacts on the sides. Ensure the charge contacts are pointing out.
- Put in the battery covers that came with the dock.
Note: These covers are similar to the factory covers. However, they possess electrical contacts that facilitate charging.
- When your Quest is not in use, keep the controllers in the charging cradles.
- Ensure each controller is placed properly for effective charging.
- Also keep the headset in the cradle to charge everything simultaneously.
Frequently Asked Questions
Use the menu button. Go to the Oculus home screen and press the menu button to display the menu. Any button will turn on your controller after you turn on your headset.
First, set your controllers on the charging dock on their sides and ensure the grip button faces upward. Then set your headset on the charging dock while ensuring the front of the headset faces you. Make sure headset and controller straps are not preventing headset and controllers from charging.
If the battery is completely drained, it should take around two and a half hours to charge fully. But if you notice that the battery doesn’t charge up after the stipulated hours, it could be that your VR controller’s battery has deteriorated or the charger is critically damaged.
Keep in mind that a charging station does not charge the controllers. Ensure that you have connected the AC power adapter to the charging station and a functional working power outlet. If your battery has been unused or stored for a long while, it may have been over-discharged. Thus, the station may be unable to charge the battery.
Try these troubleshooting steps to fix the issue:
Take out the batteries for 15 minutes or more to reset the firmware.
Make sure there aren’t any reflective surfaces around.
Then check to see if the room is properly lit for the headset to pick up the surroundings.
Unpair and repair your controllers.
Conclusion
Since the Oculus Quest/Quest 2 controllers do not come with built-in batteries, you can buy rechargeable AA batteries. Then charge the batteries and install them in your controllers. It’s that simple.