In today’s interconnected world, a stable and reliable internet connection is crucial for our daily activities. However, Windows 10 users may encounter a frustrating error known as “No Internet Secured.” This error message typically appears when you try to connect to a Wi-Fi network, indicating that there is no internet access despite a secured connection. Fortunately, there are several potential fixes for this issue. In this article, we will explore nine solutions to help you resolve the “No Internet Secured” error on Windows 10.
Table of Contents
Restart your Router and Modem:
- Sometimes, the “No Internet Secured” error can be caused by temporary glitches in your network devices. Start by turning off your router and modem, waiting for a few minutes, and then turning them back on. This simple step can often resolve connectivity issues and restore your internet connection.
Update Network Drivers:
- Outdated or incompatible network drivers can also contribute to the “No Internet Secured” error. To fix this, open the Device Manager by right-clicking on the Start button and selecting it from the menu. Locate the Network Adapters section, right-click on your network adapter, and choose “Update driver.” Windows will search for the latest driver updates and install them if available.
Disable IPv6:
- Internet Protocol version 6 (IPv6) can sometimes conflict with certain routers or network configurations, leading to connectivity problems. Disabling IPv6 can be a potential workaround for the “No Internet Secured” error. To do this, go to Network Connections, right-click on your active network connection, select Properties, and uncheck the box next to “Internet Protocol Version 6 (TCP/IPv6).” Click OK to save the changes.
Reset TCP/IP:
- Resetting the Transmission Control Protocol/Internet Protocol (TCP/IP) stack can help resolve network-related issues. Open the Command Prompt as an administrator and type the following commands one by one: “netsh winsock reset” and “netsh int ip reset.” Restart your computer after executing the commands to apply the changes.
Flush DNS Cache:
- Corrupted DNS cache can also lead to connectivity problems. Flushing the DNS cache can clear any outdated or incorrect entries and potentially fix the “No Internet Secured” error. Launch the Command Prompt as an administrator and enter the command “ipconfig /flushdns.” After the cache is flushed, restart your computer and check if the error persists.
Disable Antivirus or Firewall:
- Overly restrictive antivirus or firewall settings can sometimes interfere with network connectivity. Temporarily disable your antivirus and firewall software to check if they are causing the “No Internet Secured” error. If the issue is resolved after disabling them, consider adjusting the settings or switching to a different security solution.
Modify Power Management Settings:
- Windows 10 has power management features that can conserve energy by turning off certain devices. However, these settings can sometimes cause connectivity problems. To modify the power management settings for your network adapter, open the Device Manager, locate your network adapter, right-click on it, select Properties, go to the Power Management tab, and uncheck the box next to “Allow the computer to turn off this device to save power.”
Disable VPN or Proxy:
- If you are using a VPN or proxy server, they may be the cause of the “No Internet Secured” error. Disable the VPN or proxy temporarily to see if it resolves the issue. If the error disappears, consider updating the VPN software or contacting the provider for assistance.
Perform a Network Reset:
- If none of the above solutions work, performing a network reset can help to restore your network settings to their default state. Go to Settings, select Network & Internet, click on the “Network reset” option, and confirm your choice. Bear in mind that this will remove all your network adapters and settings, so you will need to set them up again.
Conclusion:
Encountering the “No Internet Secured” error on Windows 10 can be frustrating, but with these nine solutions, you have a good chance of resolving the issue. Start with the basic steps of restarting your router and updating your network drivers. If the problem persists, try disabling IPv6, resetting TCP/IP, or flushing the DNS cache. Additionally, check if your antivirus or firewall settings are causing the error and modify power management settings accordingly. If you use a VPN or proxy server, disable them temporarily. Finally, if all else fails, perform a network reset to reset your network settings. By following these steps, you can troubleshoot and resolve the “No Internet Secured” error on your Windows 10 system, ensuring a stable and reliable internet connection.